-
-
-
Maarc Die Hardner
- It produces a homogenous coating on the die stone and plaster attributed to its viscosity.
- It seals, hardens and water proofs stone and plaster.
- It protects models against abrasion specifically at marginal area which is most prone to breakage.
- The film does not disassociate from the die while building wax pattern due to heating.
- It is rapid setting and thereby reduces working time.
US$22.00US$32.00Maarc Die Hardner
US$22.00US$32.00 -
-
Maarc Die Spacer Separator
- Increases film formation and wetting on the mold surface at the very high temperatures produced during the die casting process
- Excess of die lubricant fails to evaporate, leading to porosity inside the casting and poor surface finishing of the part.
US$17.00 – US$27.00Maarc Die Spacer Separator
US$17.00 – US$27.00 -
-
Maarc Ni-Cr Alloy White Metal
- It is beryllium free alloy with excellent castability.
- It is reusable with addition of appx 50% fresh metal during recasting.
- It can be cast in open flame.
- It has got good burnish ability and is easy to finish.
- It can be used for making cast crown bridge and pontics and frames for hard resin crowns.
US$83.00US$130.00Maarc Ni-Cr Alloy White Metal
US$83.00US$130.00 -
-
Maarc Pattern Wax
- The basic classification from our side is being done based on hardness and stiffness and flow of waxes.
- Softer waxes with high flow are more flexible and are often used
- Flexible
- Fit perfectly in cervical areas
- High adaptation
- Stability to surfaces
US$16.00US$22.00Maarc Pattern Wax
US$16.00US$22.00 -
-
-
Maarc Sealmax-R Resin Based Root Canal Sealer
- Permanent obturation of root canals of teeth of the secondary dentition with or without the aid of obturation points.
- Eugenol Free
- Insoluble in water and non degradable
- Minimum shrinkage at room temperature
US$25.00US$34.00Maarc Sealmax-R Resin Based Root Canal Sealer
US$25.00US$34.00 -
Dpi Fine Grain Silver Alloy
- Fine Grain – high silver content (68.7%) alloy that has been the all time favorite for years.
- High Strength.
- Easy Carving.
- Superior Polish.
US$84.00US$94.00Dpi Fine Grain Silver Alloy
US$84.00US$94.00 -
Maarc Boxing Wax
- It is soft and tacky for boxing in impressions.
- Adheres easily to most of the surfaces.
-
Kerr Sybron Endo Sealapex Root Canal Sealer
- Less toxic than ZOE sealer.
- Produces rapid healing
- Inhibit root resorption subsequent to trauma.
- Prevent leakage.
- Induce Apical closure via Cementogenesis.
- Inhibit osteoclast activity via an alkaline pH.
US$96.00US$140.00Kerr Sybron Endo Sealapex Root Canal Sealer
US$96.00US$140.00 -
-
US$1,230.00
US$1,500.00Medistar Dental X-Ray Machine
US$1,230.00US$1,500.00 -
-
-
-
-
-
-
-
-
-
MAARC Cold Cure Powder 3Kg
- A cold cure self polymerizing acrylic material suitable for all types of repairs to acrylic dentures.
- Working time of 4 minutes.
- Rapid bench cure time of 14 minutes.
- Also useful in orthodontic work.
- Available in pink, clear shades & light veined shades.
US$148.00US$200.00MAARC Cold Cure Powder 3Kg
US$148.00US$200.00 -
-
-
-
US$129.00
US$170.00MAARC Cold Cure Monomer – 4ltrs
US$129.00US$170.00 -
-
-
-
-
-
-
-
-
US$3,556.00
US$4,110.00Sybron Endo Elements Obturation Unit
US$3,556.00US$4,110.00 -
US$1,371.00
US$1,690.00Kerr Sonic Fill – Sonic Activated, Bulk Fill Composite System
US$1,371.00US$1,690.00 -
Maarc MTA Repair Material
- Excellent Handling Properties
- Fine Grain
- Fast Setting
- Pure Mineral Tech : No Discoloration
- Bactericidal effect due to High pH
- Biocompatible
- Promotes mineralization of tissue
- High Strength make is suitable as base restoration material
- Good radiopacity
-
Maarc CeraSeal-B Sealer
- Excellent Handling
- Hermetic seal
- Radiopaque
- Suitable as lining material
- Pure Mineral Tech :No Discoloration
- Bactericidal
- Biocompatible
- Good radiopacity
US$39.00US$45.00Maarc CeraSeal-B Sealer
US$39.00US$45.00 -
Maarc D-Vitz Pulp Devitalizer 3gm Syringe
Luer tips are offset from barrel centerThese polypropylene syringes with Luer tips, may be used with any size needle. The rigid polyethylene plungers of these disposable syringes are slightly oversized, creating a tight seal against the walls of the semi-flexible PP barrel, as well as providing an exceptionally smooth draw. No contaminating lubricants added.US$31.00US$35.00Maarc D-Vitz Pulp Devitalizer 3gm Syringe
US$31.00US$35.00 -
Maarc Utility Wax
Base plate wax is a durable substance used mainly to fabricate occlusion rims for dental construction into which denture teeth are arranged (IE. holding artificial teeth to baseplates) before laboratory processing and during fabrication of the denture.
-
Maarc Die Thinner
Maarc Die Hardener & Spacer thinner
- Brand : MAARC
- Model : DIE THINNER
- Maarc Die Thinner : Die Thinner
US$18.00US$24.00Maarc Die Thinner
US$18.00US$24.00 -
Maarc Spacer Wax
- Thin wax sheets of 0.3 mm thickness – shape of upper and lower base plates.
- Provide uniform thickness of impression material.
- Use of spacer wax prevents direct contact of acrylic trays with soft tissues.
US$20.00US$24.00Maarc Spacer Wax
US$20.00US$24.00 -
Maarc Gsol
- Non hazardous, non carcinogenic unlike chloroform, trichloroethylene.
- Less volatile as compared to chloroform, trichloroethylene.
- Based on natural substances D – limonene, does not cause irritation to oral mucosa and periapical tissue.
- Evaporation of solvent is less due to low volatility.
US$22.00US$25.00Maarc Gsol
US$22.00US$25.00 -
Maarc Cold Cure
- A cold cure self polymerizing acrylic material suitable for all types of repairs to acrylic dentures.
- Working time of 4 minutes.
- Rapid bench cure time of 14 minutes.
- Also useful in orthodontic work.
- Available in pink and clear shades.
-
kerr
Kerr Corporation is a renowned manufacturer of high-quality dental products serving the global market. With a rich history dating back to 1891, Kerr was founded in the USA under the name “The Detroit Dental Manufacturing Company.” Kerr Corporation’s commitment to excellence & innovation led them to export their products to Europe as early as 1893. In 1939, they changed their name to The KERR Manufacturing Company and embarked on a journey of expansion and advancement in the dental industry. Throughout the years, Kerr has continuously expanded its product range, incorporating cutting-edge technologies and innovative products. They have also strategically acquired other dental companies to strengthen their offerings. Notable acquisitions include Demetron, a US manufacturer of curing lights, in 1993; Hawe Neos, a Swiss manufacturer of preventive articles and accessories for filling materials, in 2001; Spofa Dental, a Czech company, in 2003; and Pentron Clinical, a US company, in 2010. At Kerr, their expertise lies in designing and manufacturing products for all aspects of modern restorative dentistry. Kerr takes pride in their knowledgeable field service team, which works closely with a network of exclusive stockists to provide technical training and support. This collaborative approach solidifies their position as a world market leader. Kerr has made significant contributions to aesthetic dentistry through education and sustainable solutions derived from real-world insights. Today, the Kerr name is synonymous with integrity among dentists worldwide. For 125 years, Kerr has been dedicated to serving the comprehensive needs of the entire dental care community, striving to enhance oral health.