ULV Fogging Machine

• EXCELLENT CONTROL
• The ULV Micro Fogger Machine provides excellent control of droplet size, even for near invisible 0.5-10 micron droplets needed by concentrated ULV chemicals.

• LESS TIME CONSUMING AND COST EFFECTIVE
• The Micro Fogger can treat 2-4,000 cubic feet per minute, reducing application time and labor costs.

• DELIVER HIGH OUTPUT WHEN IN NEED
• when you need high output and large droplets, the Micro Fogger is just as effective.
• It can deliver up to 300 ml/min in a mist of large (30 micron) droplets used in humidification, dust abatement and sanitizing work.

• EASY TO CALIBRATE 
• The advanced Micro Fogger can apply either oil- or water based chemicals. And it’s easy to calibrate when changing liquids.

• PRODUCES A DRY FOG
• These fog Foggers atomize liquid into small droplets by shearing them in high turbulent section of nozzle.
• A low rate [30-60 ml per minute] produces a dry fog of small droplets that float extensively and diffuse widely.

• MADE OF VERY GOOD MATERIAL
• It is engineered with a 304 grade stainless steel body and is equipped with a chemical level indicator.

Ultra low volume (ULV) fogging machines are cold fogging machines that use large volumes of air at low pressures to transform liquid into droplets that are dispersed into the atmosphere. This type of fogging machine can produce extremely small droplets

INDICATION

• Humidification (Fogging Water)
• Odor Control (Fogging Odor Neutralizers, Scents or Masking chemicals)
• Applications of Insecticides
• Application of Germicides or Sanitizing Chemicals for Cleaning & Sanitation Purposes
• Control of mold and mildew (Applying Sporicides, Fungicides or anti mildew Chemicals).

ADVANTAGE

• Maximum area coverage as compared to any other conventional fogger.
• 100% Convenient, Portable & Easy to use.
• Precisely designed
• Flawless finish
• Durable nature
• Longer life

TECHNICAL SPECIFICATIONS:

• Body & Tank 304 Grade Stainless Steel
• Tank Capacity 4 Litre of Chemical Storage
• Blower Motor >26000 RPM Motor
• Nozzle 1 Counter Rotationg Vortex Nozzle
• Chemicals Can atomize both oil-based and water-based
  liquids.
• Control Valve One turn. Brass Valve
• Particle Size 7-30 μ, adjustable. Liquid viscosity and density
  can affect particle size.
• Range Visible fog, 20-30 ft [7.5 m]
• Input 230V 50Hz Power Supply
• Dimensions [ 33 x 41 x 23.5 cm ] L x H x Dia.

CLEANING AND MANAGEMENT:

A) Normal Cleanup:

• When Fogging is complete, remove the suction tube from the liquid source and operate the fogger for one minute with valve full open. This will expel any liquid remaining in the fogger’s internal lines. Transfer excess chemical from tank to an appropriate container.

B) Cleanup of Difficult Liquids:

• After fogging a viscous liquid,emulsion or a solid suspension, begin with a normal cleanup (Step A).
• Then put suction tube into an appropriate solvent for your fogging chemcial (water for water-dispersible liquid, kerosene for oil based liquids) and operate for 1-2 minutes flushing residual chemicals with clean solvents. Then again repeat Step A.

C) Cleanup for Long Term Storage:

• Remove all the liquid from the tank to eliminate the potential for long term chemical attack on tank, suction tube or tubing. Then follow Step A or B.

ABOUT MOTOR BRUSHES

• Two graphite brushes convey electric power to the motor commutator.
• Brushes are a consumable item,and have a lifetime of about 650 operating hours, after consumption of brushe.
• It is required to replace the old brushes with new ones.
• Operating without the air intake filter lets airborne dirt and moisture enter the motor,this can reduce brush life substantially. When brushes are worn the motor does not operate properly.

• 1 x Fogging machine