Super Endo Anterior Preparation Burs Kit

Superendo anterior preparation bur kit is specially designed with an exclusive range of diamond burs and also a tungsten carbide bur for simple, efficient and accurate tooth preparation of front teeth.

Multilayer coating of these diamond burs makes them highly durable.

Different grain sizes allow the targeted removal of specific volumes and maximum conservation of tooth substance.

Features :-

• Durable Burs with multi-layer coating.
• Silcone inside hold burs tightly
• Full set autoclavable upto 134ºC
• Sturdy built
• Evenly coated burs for even cutting

Shank type – Friction grip

Construction – Stainless steel shank evenly coated with diamond particles and tungsten carbide

Autoclavable upto 134°C

Color band on shank:

• Regular – Blue
• Fine – Red
• Superfine – Yellow

Set Of 10 Burs :

• TF-13
• BR-31
• FO-25
• TR-13
• TR-13F
• TR-13EF
• TR-11
• CE-15F
• EX-19F
• ENDO Z

1 x 10 Burs in Superendo Anterior Preparation Burs Kit

• Insert the instrument as deeply as possible into the chuck (Friction Grip).
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230’000 [rpm].
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• It is recommended to use a dental dam.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses.

Q. Can these burs be autoclaved ?

A. Yes, these burs indeed come in a packaging that can be autoclaved and the burs can be reused thereafter.

Q. What should I do to prevent instrument fracture ?

A. Avoid jamming or levering actions when rotating, as this increases the risk of instrument breakage. Never exceed the specified maximum speed. Avoid applying forces greater than the recommended values, as this could cause damage to the instrument and the treated area. Always Check for possible damages; dispose of oxydized, blunt and eccentric instruments.

Q. When to dispose these Crown Preparation Burs ?

A. Check for possible damages; dispose of oxydized, blunt and eccentric instruments