EiTi Acrylic Bullet Shaped Polishers 1/pk

• Ideal for trimming or finishing of acrylic.
• Durable & premium quality burs.
• Different grits available as per need.
• Points for gross Finishing & polishing of the acrylic material.
• Compatible with Lab Handpiece/Straight handpiece.

EiTi Acrylic Bullet Shaped Polishers are premium quality burs used in finishing & polishing of acrylic prosthesis be it RPD (Removable partial denture) or CD (Complete Denture).

They are available in different grits & colors for trimming different phases of finishing & polishing:

Black Extra Coarse – These burs are used for finishing of major rough surfaces or cuts present on the surface of prosthesis.

Grey Coarse – These burs are used for finishing of major to minor rough surface of the prosthesis.

Brown Medium Coarse – These burs are used for finishing of mild rough surfaces of the prosthesis.

Green Medium – These burs are used for finishing of rough corners/surfaces of the prosthesis.

Pink Medium Fine – These burs are used for medium fine finishing & polishing of the surface of the prosthesis.

Blue Fine – These burs are used for fine finishing & polishing of the surface of the prosthesis.

Available Colours :-

• Black
• Grey
• Brown
• Green
• Pink
• Blue

Head Length – 17mm

Diameter – 6mm

• 1 x EiTi Acrylic Bullet Shaped Polisher

• Insert the instrument as deeply as possible into the Straight Handpiece.
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a minimum operating force & do not exceed the recommended speed .
• Finish borders with an acrylic bur.
• Remove excess resin beyond the land area.
• Be careful to preserve the border width and contour.
• Smooth the denture bases to the proper contour with your acrylic burrs.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the finishing has been completed, remove the instrument from the site and allow the bur to come to a standstill.
• It is recommended to wear gloves and safety glasses.