Name: Anand MB-36 Suction Unit Ms Body (Mild Steel) -25Ltr
Brand: Anand
SKU: DE28414
Availability: InStock

Anand MB-36 Suction Unit Ms Body (Mild Steel) -25Ltr

A smaller version of our suction series for use in surgical procedures where fast vacuum build-up is required.

This suction unit is highly recommended to be used in dental clinics & for minor surgeries

INDICATIONS:

Minor OT’s
Intensive Care Unit
Emergency Department
Wards
Dental Clinics

Key Specifications

TECHNICAL SPECIFICATIONS:

Housing	MS powder coated,Ss top on two wheels
Max. Vacuum / LPM	-700 mm Hg, 25 Ltrs / min
Pump Type	Single Rotary Vane Pump
Jars	2 x 2 Ltrs. PC Jar
Filter	Trap Filter
Tubing	8 mm ID x 2 mtr. (PVC)
Vacuum Gauge	6.5 cm dia 0-760 mm Hg
Power Supply	220 V AC, 50 / 60 Hz, 180 Watt
Noise Level	55 dB A ± 3
Dimensions	43 x 30 x 62 cms
Net Weight	24 Kg
Overflow Safety	Mechanical

Packaging

1 x Suction unit
2 x 2Ltr Jar

Direction to Use

Motorised pump is housed in the cabinet. On the platform, apart from the oil container, is a filter which is the suction inlet. To faster it well with the base, four black hexa bolts (used as hold fast for transportation at the bottom of the unit) MUST be removed by rotating anticlockwise with the aid of a simple handtool.

Before the unit is put on, please see that:

The plug is connected to the grounded relevant mains outlet. In case of fluctuation, use voltage stabilizer.
The vacuum control knob is not loose. It must be fully tightened clockwise.
The lids are tightly placed on the jars and the tube on the nozzle of the lids.
The oil container is full with lubrication oil No. 40. So that there is no leakage at the nozzle-connector joint, press and twist the connector to make it snug fit. Same way while unplugging, twist and pull.
NOTE:
The unit can overheat if it is restarted while under vacuum. Make sure it is between 0 and 150 mm Hg
Always turn the power off with the power switch after job is complete or, in case of breakdown, in between the use.

Warranty

Manufacturer/Importer warranty of 1 Year against manufacturing defect
Service and Warranty are handled by the manufacturer/importer directly for this product
Dentalkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
Dentalkart and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer’s warranties only
Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalkart may assist the customer in registering a request to get the Product replaced or serviced.
The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.