-
Zhermack Hurrimix
- Electronic microprocessor control
- Large digital display
- Polycarbonate membrane controls
- Metal/plastic casing
US$3,152.00US$3,650.00Zhermack Hurrimix
US$3,152.00US$3,650.00 -
-
US$29.00 – US$197.00
-
-
Zhermack Hydrorise Putty & Light Body Combo
- At least 99% elastic recovery
- Dimensional stability for upto 21 days
- Tear resistance
- Biocompatible even on damaged mucosa
US$162.00US$195.00Zhermack Hydrorise Putty & Light Body Combo
US$162.00US$195.00 -
MAARC Cold Cure Powder 3Kg
- A cold cure self polymerizing acrylic material suitable for all types of repairs to acrylic dentures.
- Working time of 4 minutes.
- Rapid bench cure time of 14 minutes.
- Also useful in orthodontic work.
- Available in pink, clear shades & light veined shades.
US$148.00US$200.00MAARC Cold Cure Powder 3Kg
US$148.00US$200.00 -
-
US$139.00
US$190.00Zhermack Acrytemp Temporary Crown Material A2
US$139.00US$190.00 -
-
US$129.00
US$170.00MAARC Cold Cure Monomer – 4ltrs
US$129.00US$170.00 -
-
US$84.00
US$94.00Zhermack Elite Hd+ Putty Soft Normal Set 2 x 250ML
US$84.00US$94.00 -
Dpi Fine Grain Silver Alloy
- Fine Grain – high silver content (68.7%) alloy that has been the all time favorite for years.
- High Strength.
- Easy Carving.
- Superior Polish.
US$84.00US$94.00Dpi Fine Grain Silver Alloy
US$84.00US$94.00 -
-
Maarc Ni-Cr Alloy White Metal
- It is beryllium free alloy with excellent castability.
- It is reusable with addition of appx 50% fresh metal during recasting.
- It can be cast in open flame.
- It has got good burnish ability and is easy to finish.
- It can be used for making cast crown bridge and pontics and frames for hard resin crowns.
US$83.00US$130.00Maarc Ni-Cr Alloy White Metal
US$83.00US$130.00 -
Zhermack Zetaplus C Silicone Intro Kit (Base + Catalyst + Light Body) (C100730)
- Safe disinfection with Zeta 7 Solution and Zeta 7 Spray.
- Excellent relation between rigidity and elasticity
- Ideal working time/setting time ratio
- High flowability and accuracy of wash materials
- Putty and wash materials with the same catalyst.
- High initial flowability
- Green color
- Spearmint flavor
US$82.00US$90.00 - Safe disinfection with Zeta 7 Solution and Zeta 7 Spray.
-
US$81.00
US$89.00Andent Zirconia Block -HT (High Translucent)
US$81.00US$89.00 -
-
Zhermack Hydrorise Putty & Light Body Impression material
- Assemble the dispensing gun and cartridge
- Before fitting the tip, make sure that the two components (base and catalyst) flow out evenly by pressing gently on the dispenser lever and extruding a small amount of material. Remove this material before proceeding.
- Fix the mixing tip and the optional intraoral tip.
US$77.00US$84.00Zhermack Hydrorise Putty & Light Body Impression material
US$77.00US$84.00 -
-
-
US$69.00
US$90.00Zhermack Occlufast Rock Bite Registration Material
US$69.00US$90.00 -
US$69.00
US$90.00Zhermack Zetaplus Putty C Silicone Impression Material
US$69.00US$90.00 -
-
-
US$67.00
US$80.00Zhermack Elite Hd+ Light Body Normal Set
US$67.00US$80.00 -
-
-
US$48.00
US$60.00Zhermack Hydrogum 5 Alginate Powder
US$48.00US$60.00 -
US$45.00
US$75.00Zhermack Neocolloid Alginate Powder
US$45.00US$75.00 -
-
-
Maarc CeraSeal-B Sealer
- Excellent Handling
- Hermetic seal
- Radiopaque
- Suitable as lining material
- Pure Mineral Tech :No Discoloration
- Bactericidal
- Biocompatible
- Good radiopacity
US$39.00US$45.00Maarc CeraSeal-B Sealer
US$39.00US$45.00 -
-
-
-
-
-
-
Maarc D-Vitz Pulp Devitalizer 3gm Syringe
Luer tips are offset from barrel centerThese polypropylene syringes with Luer tips, may be used with any size needle. The rigid polyethylene plungers of these disposable syringes are slightly oversized, creating a tight seal against the walls of the semi-flexible PP barrel, as well as providing an exceptionally smooth draw. No contaminating lubricants added.US$31.00US$35.00Maarc D-Vitz Pulp Devitalizer 3gm Syringe
US$31.00US$35.00 -
Zhermack Tropicalgin Alginate Powder
- Fast water absorption
- Easy mixing
- Homogenous mass, smooth, compact surfaces
- Pleasant mango flavor
- Normal setting
- Long impression storage
US$28.00US$35.00Zhermack Tropicalgin Alginate Powder
US$28.00US$35.00 -
-
Maarc Die Spacer Separator
- Increases film formation and wetting on the mold surface at the very high temperatures produced during the die casting process
- Excess of die lubricant fails to evaporate, leading to porosity inside the casting and poor surface finishing of the part.
US$17.00 – US$27.00Maarc Die Spacer Separator
US$17.00 – US$27.00 -
-
US$27.00
US$34.00Zhermack Zetalgin Chromatic Alginate (C301004)
US$27.00US$34.00 -
US$27.00
US$34.00Stoddard Prophylaxis Paste – Mint Flavoured
US$27.00US$34.00 -
-
-
-
-
Maarc Sealmax-R Resin Based Root Canal Sealer
- Permanent obturation of root canals of teeth of the secondary dentition with or without the aid of obturation points.
- Eugenol Free
- Insoluble in water and non degradable
- Minimum shrinkage at room temperature
US$25.00US$34.00Maarc Sealmax-R Resin Based Root Canal Sealer
US$25.00US$34.00 -
-
-
Maarc Gsol
- Non hazardous, non carcinogenic unlike chloroform, trichloroethylene.
- Less volatile as compared to chloroform, trichloroethylene.
- Based on natural substances D – limonene, does not cause irritation to oral mucosa and periapical tissue.
- Evaporation of solvent is less due to low volatility.
US$22.00US$25.00Maarc Gsol
US$22.00US$25.00 -
Maarc Die Hardner
- It produces a homogenous coating on the die stone and plaster attributed to its viscosity.
- It seals, hardens and water proofs stone and plaster.
- It protects models against abrasion specifically at marginal area which is most prone to breakage.
- The film does not disassociate from the die while building wax pattern due to heating.
- It is rapid setting and thereby reduces working time.
US$22.00US$32.00Maarc Die Hardner
US$22.00US$32.00 -
Maarc Spacer Wax
- Thin wax sheets of 0.3 mm thickness – shape of upper and lower base plates.
- Provide uniform thickness of impression material.
- Use of spacer wax prevents direct contact of acrylic trays with soft tissues.
US$20.00US$24.00Maarc Spacer Wax
US$20.00US$24.00 -
Zhermack Mixing Pad For Impression Material
- High quality mixing paper pad
- Designed for materials to easily be mixed and kneaded
- Liquid impermeable surface
- Smooth finished surface
US$19.00US$32.00Zhermack Mixing Pad For Impression Material
US$19.00US$32.00 -
US$18.00
US$24.00Zhermack Scoop And Measuring Jar For Alginate
US$18.00US$24.00 -
US$18.00
US$22.00Zhermack Mixing Pad For Light Body Tubes
US$18.00US$22.00 -
Andent
Andent Dental Co., Ltd., established in 2009, is a leading dental instruments manufacturer located in Huanghua Mould Industrial Park, Hebei province, strategically positioned near Beijing and Tianjin seaports. With a rich history dating back to 1990, Andent Dental Instruments has evolved into a prominent, state-of-the-art producer of dental plastic consumables in China. Andent commitment to excellence has enabled them to offer a comprehensive range of products across nine distinct categories, boasting over 100 styles meticulously designed to meet the diverse needs of dental professionals.
Discover the extensive portfolio, featuring Denture Boxes, Orthodontic tools, Mouth Props, Cotton Roll Dispensers, Impression Trays, Endodontic instruments, Dental Mirrors, Dental Tweezers, and Dental Scalers. Each instrument is crafted with precision and durability in mind, ensuring exceptional performance and optimal patient care.
At Andent Dental, products undergo rigorous testing and adhere to the highest industry standards, providing dental practitioners with reliable tools that facilitate seamless procedures and superior outcomes. Experience the difference between Andent’s meticulously crafted instruments as they enhance your dental practice, one precision tool at a time.